DL-HDM44 Installaon Guide
13
Router Connecon
1. Congure the router to use the same IP range as the matrix, such as 192.168.0.1.
2. Connect the computer to the router.
3. Connect the DL-HDM44 to the router
Crossover Cable Connecon
1. Congure the computer to use the same network prex as the IP address assigned to the matrix. For
example, the IP address of the matrix is 192.168.0.178. Set the computer to use a stac IP address within
the same network range, such as 192.168.0.42.
2. Connect the network crossover cable to the computer and to the TCP/IP port on the DL-HDM44.
Web Browser Control
The DL-HDM44 includes a web portal to allow control of the matrix via a standard web browser. The IP address
is the same address that is used for TCP/IP control. See page 16 for detailed informaon regarding the web
browser interface, including customizaon.
TIA/EIA-568A
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
Crossover Cable Pinout
Comments to this Manuals